Communication & Data Storage

Digital I/O connector type

12-pole M12 connector (shared with Digital Synchronization and External power)

Digital I/O isolation voltage

500 VRMS

Digital I/O supply voltage

2–40 VDC, max 200 mA

Digital Inputs

General Purpose, 1× opto-isolated, "0"

Digital Output Purpose

General purpose output to ext. device (programmatically set)

Digital Outputs

1× opto-isolated, 2–40 VDC, max 185 mA

Digital Synchronization Connector Type

12-pole M12 connector (shared with Digital I/O and External power)

Ethernet

Control and image

Ethernet Communication

GigE Vision ver. 1.2 Client API GenICam compliant

Ethernet Connector Type

RJ-45

Ethernet Image Streaming

8-bit monochrome @ 60 Hz Signal linear/ DDE Automatic/ Manual Flip H&V 14-bit 320 × 256 pixels @ 60 Hz Signal linear/ DDE Temperature linear GigE Vision and GenICam compatible

Ethernet Power

Power over Ethernet, PoE IEEE 802.3af class 0 Power

Ethernet Protocols

TCP, UDP, ICMP, IGMP, DHCP, GigEVision

Ethernet Standard

IEEE 802.3

Ethernet Type

Gigabit Ethernet

Synchronization in

1×, non-isolated

Synchronization in - purpose

Frame sync in to control camera

Synchronization in - type

LVC Buffer @3.3V, "0" 2.0 V.

Synchronization out

1×, non-isolated

Synchronization out - purpose

Frame sync out to control another Ax5 camera

Synchronization Out - type

LVC Buffer @ 3.3V, "0"=24 MA max, "1"= –24 mA max.

Imaging & Optical

Detector Pitch

17 µm

Detector Time Constant

Typical 12 ms

Detector Type

Focal plane array (FPA), uncooled VOX microbolometer

Field of view (FOV)

13° × 10°

FLIR Screen-EST Mode

No

f-number

1.1

Focal Length

25 mm (0.98 in.)

Focus

Fixed

Image Frequency

60 Hz

IR Resolution

320 × 256 pixels

Spatial resolution (IFOV)

0.680 mrad

Spectral Range

7.5–13 µm

Thermal Sensitivity/NETD

<0.05°C @ 30°C (86°F) / 50 mK

Measurement & Analysis

Accuracy

±5°C (±9°F) or ±5% of reading

Atmospheric transmission correction

Automatic, based on inputs for distance, atmospheric temperature and relative humidity

Camera size (L x W x H)

107.8 × 49.6 × 46.6 mm (4.2 × 1.9 × 1.8 in.)

Emissivity Correction

Variable from 0.5 to 1.0

Measurement Corrections

Global object parameters

Object Temperature Range

-25°C to 100°C (-13 to 212°F) / –40°C to 550°C (-40 to 1022°F)

Optics Transmission Correction

Automatic, based on signals from internal sensors

Reflected apparent temperature correction

Automatic, based on input of reflected temperature

General

Base Mounting

4 × M3 thread mounting holes (bottom)

Housing material

Magnesium and aluminum

Package Includes

Hard transport case Infrared camera with lens Base support Cable tie (2 ea.) Ethernet cable CAT-6, 2m/6.6 ft (2 ea.) FLIR ResearchIR Standard 4 Focus adjustment tool Gooseneck Mains cable kit (UK,EU,US) PoE Injector (power over Ethernet) Printed documentation Table stand

Packaging Size

370 x 180 x 320 mm (14.6 x 7.1 x 12.6 in.)

Environmental & Certifications

EMC

•EN 61000-6-2 (Immunity) •EN 61000-6-3 (Emission) •FCC 47 CFR Part 15 Class B (Emission)

Encapsulation

IP 40 (IEC 60529) with base support mounted

Humidity (Operating and Storage)

IEC 60068-2-30/24 h 95% relative humidity 25°C to 40°C (77°F to 104°F)

Operating Temperature Range

–15°C to +50°C (+5°F to +122°F) The operating temperature range assumes that the camera is mounted on the base support (included in the package) or a similar type of heatsink.

Shock

25 g (IEC 60068-2-27)

Storage Temperature Range

–40°C to 70°C (–40°F to 158°F)

Tripod Mounting

UNC ¼"-20 (on three sides)

Vibration

2 g (IEC 60068-2-6 & MIL-STD810G)

Power

External Power Connector Type

12-pole M12 connector (shared with Digital I/O and Digital Synchronization )

External Power Operation

12/24 VDC, < 3.5 W nominal < 6.0 W absolute max

Voltage

Allowed range 10–30 VDC